Call: 1.877.239.1990

Pavement Products & Services, Inc.

PP&S Inc. is the leading asphalt milling company in the Southeast. Started in 1992, Jack Hagood, CEO, has strived to make PP&S the best asphalt milling company in the Southeast. Jack and his team have provided excellent milling services for over 21 years and continue to perform the best quality work. In addition to milling, PP&S does Asphalt Repair & Seal Coating for private and commercial clients throughout Upstate South Carolina. Our team at PP&S looks forward to serving you as a customer and hope we provide the best service possible.

Our Goal is to provide and assure that our Asphalt milling and repair Services exceed all Customer and DOT requirements – at a price that keeps us and our Customers Competitive.

KEYS TO OUR SUCCESS

Achieving a reputable market position is no easy task. However, anchored by a desire to succeed and the commitment to provide quality service, our management team has accomplished just that. From the beginning, we understood that a company is only as good as its employees. This, above all else, has contributed to making our company what it is today.

We own and operate a large fleet of milling machines, clean up equipment, asphalt repair equipment and seal coating equipment to meet the needs of any project. Please visit our milling page and asphalt repair page to learn more about our services.

where we are today

With a strong foundation our team at PP&S has been able to attain its goal of providing a service far superior than the industry standard. In fact, over the last 21+ years, we have become one of the largest privately owned asphalt milling companies in the Southeast. With a talented management team that has over 100 years combined experience

within the road building industry, it is no surprise that our repeat clientele includes almost every major road builder in the South.

Our latest work

I-240 - NC

Jobsite:

North Carolina I-240

APAC – Atlantic, Inc. (Asheville Division)
Buncombe County I-240
NCDOT Project #: C202545

Job Description: Over 100,000 square yards of variable milling on shoulders, ramps, and under bridge overpasses.

Fulton Co.

Jobsite:

Fulton County, US 29/SR 8

Fulton County, US 29/SR 8
CW Matthews Contracting, Inc.
GADOT #: CSSTP-M003-00 (753) 01

Job Description: 200,000 SY of 1.5” milling – job consists of multi-lane intercity streets with 97 intersections & off ramps. Job was done with two milling machines and a trimmer cleaning around curb & gutter and multiple utilities.

Fulton 1
Charleston & Berkley Co.

Jobsite:

Berkeley & Charleston County,
I-526 & I-26

Banks Construction
Berkeley & Charleston County, I-526 and I-26 Resurfacing and Surface Planing
SC File #: 08.038314 & 10.038446

Job Description: 688,000 square yards - 1.25” depth micro milling – The job called for micro milling the old, aged OGFC off of the interstate and leaving a smooth enough

surface for water to drain under the new OGFC course. We used a 12’ milling machine with 1 of our 4 micro mill heads. We averaged 2.5 miles a night while achieving the desired result.

Charleston 1
Richland Co.

Jobsite:

Richland County, I-77 Rehab

Rea Contracting
Richland County, I-77 Rehab and Surface Planing
SC File #: 40.038743

Job Description: Job called for 74,000+ square yards of 1” surface planing and 4,000 square yards of variable surface planing for cross slope correction. The multiplex system was used while doing the cross slope correction.

Volusia Co.

Jobsite:

Volusia County – Daytona Beach, AIA

P&S Paving, Inc.
Project # T5247, #411985-1-52-01

Job Description: Milled 1.5” depth matching existing cross slopes. Milled, cleaned and paved over two miles per day.

NC I-85

Jobsite:

North Carolina I-85

Rea Contracting
Gaston & Cleveland County
NCDOT Project #: C202611

Job Description: 7.2 miles of I-85 mainline milling. 2” depth matching existing cross slope with a pave back the same evening.

Greenville Co.

Jobsite:

Greenville County, I-185

Ashmore Brothers
Greenville County, I-185 Pavement Rehabilitation and Surface Planing
SC File #: 23.038623

Job Description: 48,000 square yards of 2” micro milling done in one inch lifts then 48,000 square yards to correct cross slope with the multi-plex system.

Greenville 1
Greenville Co.

Jobsite:

Greenville County, I-85

Sloan Construction
Anderson and Greenville County, I-85 Pavement Rehabilitation and Surface Planing
SC File #: 0423.037173A

Job Description: Milled 1.5 million square yards of 1.0” depth asphalt, running our multi-plex equipped 12’ micro mill. We ran the multi-plex averaging system to help smooth the existing ride and help our customer achieve their

stringent rideability requirements. Then we micro milled 500,000 square yards of variable depth asphalt in the flat areas to within 0.08% of final cross-slope tolerance for the final surface course of asphalt.

Greenville 2
Spartanburg Co.

Jobsite:

Spartanburg County,
I-85 & Business 85

Ashmore Brothers
Spartanburg County, I-85 & Business 85
SC File #: 42.03177A/p>

Job Description: Micro milled multi lane junction of I-85 and I-85 business to proper cross slope including shoulders. In phase II we performed a 2” mill & fill including all clean up & trimming at bridge skews.

Spartanburg 1
Spartanburg 2
NCAT

Jobsite:

NCAT Pavement Test Track
(National Center for Asphalt Technology)

Cargill Deicing Technology
Opelika, AL – NCAT Test Track Micro Milling

Job Description: Micro milled the polymer epoxy overlay that was currently on a part of the NCAT Test Track. It was a nominal 3/8” thick and needed to be removed to the interface of the asphalt pavement that it was currently bonded to. Micro milled with our 12’ machine. The NCAT Pavement Test Track is managed by National Center for Asphalt Technology (NCAT), the largest asphalt research center in the western hemisphere.